TESTING

TestingWith a broad array of testing capability, Amphenol Printed Circuits provides the knowledge and equipment necessary to ensure your products are operating within anticipated design parameters. With a full suite of advanced testing equipment, supporting testing levels I thru IV, the Amphenol Advantage affords customers the broadest array of test solutions possible.

LEVEL 1 TESTING

Flying Probe

ATG A7-16ATG A6-16
    • Continuity Kelvin 4 Wire: 0.1mΩ - 300KΩ
    • Continuity 2 Wire: 2 – 10KΩ
    • Isolation: Up to 1000V
          • Up to 25MΩ (Field Measurement)
          • Up to 10GΩ (Resistive)
    • Embedded Component Test
          • Resistors, Capacitors, Inductors, Diodes
    • Latent Defect Testing
    • 24 x 39.4” Test Area
    • Soft Touch Probe Technology

      • Continuity 2 Wire: 2 – 10KΩ
      • Isolation: Up to 500V
            • Up to 10GΩ (Resistive)
      • Embedded Component Test
            • Resistors, Capacitors, Inductors, Diodes
      • 24 x 24” Test Area

Bed of Nails

Everett Charles 9090
    • 25.6 x 19.2” Single Density, Double Sided Grid
    • Continuity 2 Wire: 5 - 600 Ω
    • Isolation: Up to 250V
          • Up to 100MΩ

OTHER TESTING OPTIONS

Hipot
    • Automated (DITMCO 2115)
          • Up to 1500VDC
                  • 1GΩ IR
    • Manual (Associated Research Hipot Ultra II 7540DT)
          • DC Withstanding
                  • Up to 6000VDC
          • AC Withstanding
                  • Up to 5000VAC
          • IR
                  • Up to 1000VDC
    • Breakdown (Hipotronics 750-02-D149)
          • Up to 50KVAC

Impedance
    • Polar RITS Robotic Impedance Station
    • Polar CITS 500s4 Manual Impedance Station

Signal Integrity/TDR
    • Introbotix Accuprober HF50
          • Tektronix DSA8300 Analyzer
          • Tektronix 80e10B 50GHz TDR Sampling Heads
          • VNA (S-Parameter) Measurements up to 50GHz
          • SET2DIL/SET2SEIL Measurements up to 30GHz
          • SPP (Short Pulse Propagation) Measurements up to 50GHz

LEVEL 2 TESTING

Bed of Nails

TTI 44K
    • Continuity 2 Wire: 5
    • 100Ω Isolation up to 250V
          • Up to 10GΩ
    • 24 x 18” Single Density, Single Sided Test area
    • Embedded Components
          • Resistors
          • All other components are protected from Isolation Voltage Only.

Cable Tester

Omni 2501
    • Continuity 2 Wire: 2 -999KΩ
    • Isolation: Up to 500V
          • Up to 500MΩ

LEVEL 3 TESTING

Bed of Nails

In-Circuit Test (Assembly)
    • Seica Inc.
          • V8 Flying Probe
    • LCX Software
          • Takaya 9400 Flying Probe
          • Teradyne Test Station TS128LX

LEVEL 4 TESTING

Functional Test (Assembly)
      • Y-Tek FT100
            • +5V (1A), +12V(1A), -12V(1A), Programmable 0-10V(1A)
            • 40 Digital GPIO’s (TTL Switch Levels)
            • 8 Analog Inputs (0 – 10V or +/-5V) 12 Bit Resolution
            • 7 Outputs  (0 – 10V or +/-5V) – 4 @ 12 Bit Resolution.

 

  • 91 Northeastern Blvd
        Nashua, NH 03062
  • (603) 324-4500
  • This email address is being protected from spambots. You need JavaScript enabled to view it.

Send Us A Message

  Mail is not sent.   Your email has been sent.
We use cookies to improve our website. By continuing to use this website, you are giving consent to cookies being used. Cookie policy. I accept cookies from this site. Agree